Engineering Analysis Services

Are you looking to gain deeper insights into your design’s performance, reduce the risk of costly prototype failures, or outperform your competition with an optimized product? If so, ASR’s Engineering Analysis Services provide the data-driven solutions you need.

By integrating Engineering Analysis Services into your development process, you can identify potential failure points early, implement analysis-driven design improvements, and reduce the need for expensive prototype iterations. In today’s competitive market, simply meeting performance requirements isn’t enough—you need to optimize your design for efficiency, durability, and cost-effectiveness to stay ahead.

Industries We Serve

ASR provides Engineering Analysis Services across a broad range of industries, ensuring structural integrity, safety, and optimal performance for even the most complex projects. Our expertise includes, but is not limited to:

Aerospace & Defense – Structural and dynamic analysis for satellites, rocket valves, defense aircraft, and bird strike impact testing, and more.
Structural Engineering – Validation of architecturally challenging features, load-bearing structures, and more.
Electronic Packaging – Thermal and vibration analysis for high-performance electronic enclosures, including lasers and additional systems.
Modular Construction – Structural analysis for prefabricated and modular building systems.
Mechanical Engineering – Performance analysis for heavy industrial equipment, pressure vessels, and more.
Nuclear Energy – Turbine stress and thermal analysis to ensure safety and longevity in extreme environments.
Carbon Capture – Specialized CFD and FEA simulations for CO₂ flow modeling, chemical reaction efficiency, and system integrity in carbon sequestration and direct air capture applications.
Renewable Energy – Engineering solutions for wind, solar, and more energy infrastructure, including structural and aerodynamic optimization.
Other Industries – We are open to assisting any industry where advanced engineering analysis is required.

Why Choose ASR’s Engineering Analysis Services?

Optimize Your Design for Cost & Performance – FEA helps locate key areas where material can be removed, while CFD optimizes fluid flow paths and system efficiency.
Identify & Resolve Failures – Use computational simulation to pinpoint failure mechanisms and test solutions before physical prototyping.
Comprehensive Multi-Physics Analysis – Frequently combining thermal, structural, and fluid dynamics analysis to solve complex engineering challenges.
Bird Strike & Impact Analysis – Conduct explicit dynamic simulations to predict damage from high-speed bird impacts on aircraft and aerospace components.
Shock & Vibration Analysis – Evaluate the effects of shock loads, fatigue, and vibration in aerospace, automotive, and industrial applications to ensure long-term durability.
Carbon Capture Analysis – Utilize Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to enhance CO₂ capture efficiency, optimize chemical flow paths, and validate system integrity in sequestration systems.
Renewable Energy Engineering – Perform structural, thermal, and aerodynamic analysis for wind turbines, solar panel structures, and additional systems to improve efficiency and longevity.
Post-Analysis Recommendations & Optimization Reports – Receive detailed insights and design improvements based on real-world performance simulations.
Custom Analysis Solutions & Free Quotes – Whether your project requires custom-coded simulation scenarios or highly specialized engineering studies, we tailor solutions to meet your needs.

Engineering Analysis & Design Software We Use

At ASR, we leverage industry-leading simulation and design software to deliver precise, high-fidelity engineering solutions.

Analysis Software:

ANSYS Mechanical – Structural, thermal, and vibration simulations.
ANSYS CFX & Fluent – Advanced Computational Fluid Dynamics (CFD) analysis.
LS-DYNA – Explicit dynamics and crash simulations, including bird strike impact modeling.
Nastran – Aerospace and defense-grade structural analysis.
SolidWorks Simulation – Integrated mechanical analysis and validation.

Design Software:

SolidWorks – 3D modeling and parametric design.
CATIA – Aerospace and automotive component design.
- Composites Design 3 (CPD) – Composite ply layup design.
Inventor – Industrial and mechanical system modeling.
Creo (Pro/ENGINEER) – Parametric and direct modeling for complex engineering systems.
Siemens NX – Advanced CAD/CAM/CAE integration.
AutoCAD – Precision 2D and 3D drafting for architectural and structural design.
Fibersim – Composite materials and laminate engineering for lightweight structures.

Codes & Standards We Work With

At ASR, our Engineering Analysis and Design Services are performed in accordance with industry-recognized codes and standards to ensure safety, reliability, and compliance. We have extensive experience with national, international, and industry-specific standards, including but not limited to:

Structural & Civil Engineering Standards

ASCE 7 – Minimum Design Loads for Buildings and Other Structures
IBC (International Building Code) – Compliance with modern building safety regulations
National Building Code of Canada (NBCC) – Structural and safety regulations for Canadian projects
AISC 360 – Specification for Structural Steel Buildings
ACI 318 – Building Code Requirements for Structural Concrete
Steel Joist Institute (SJI) – Design and manufacturing guidelines for steel joists
PCI Design Handbook – Precast and Prestressed Concrete Design guidelines
TMS 402/602 – Building Code Requirements and Specifications for Masonry Structures
AWC NDS – Wood Design Package, including timber and engineered wood structures
AASHTO LRFD Bridge Design Specifications – Load and Resistance Factor Design for bridge engineering

Aerospace & Defense Standards

Aerospace Material Specifications (AMS) – Material selection for aerospace applications
Department of Defense Test Method Standard (MIL-STD-1580B) – Material and component reliability requirements
MIL-STD-810 – Environmental engineering considerations for military equipment
MIL-HDBK-17 – Composite material design handbook
Fastener Standards:
- National Aerospace Standard (NAS) Fasteners
- Army-Navy (AN) Fasteners
- Military Standard (MS) Fasteners
- Helical Coils
NASA-STD-5002a – Structural design and test factors for spacecraft
NASA-STD-5019 – Fracture Control Requirements for Spaceflight Hardware
NASA-STD-5020 – Requirements for Threaded Fastening Systems in Spaceflight Hardware
MMPDS – Metallic Materials Properties Development and Standardization
DO-160E – Environmental conditions and test procedures for airborne equipment
FAA Requirements – Compliance with Federal Aviation Administration regulations

Mechanical, Process, & Industrial Standards

ASME Code (American Society of Mechanical Engineers) – Including but not limited to:
- ASME Section II – Materials
- ASME Section III – Nuclear facility components
- ASME Section VIII – Pressure vessels
API 610 – Centrifugal pumps for petroleum, petrochemical, and natural gas industries
ASME B31.3 – Process Piping for chemical and industrial facilities
NFPA 79 – Electrical Standard for Industrial Machinery Handbook
NRC Regulations – Compliance with Nuclear Regulatory Commission requirements

Reliability & Safety Standards

OSHA 1926 – Occupational Safety and Health Administration construction regulations
MIL-HDBK-217F Notice 2 – Reliability prediction for electronic equipment
MIL-STD-810 – Environmental testing for military hardware
MIL-STD-1580B – Military standard for materials reliability and durability

Additional Standards & Custom Compliance Solutions

If your project requires adherence to other industry-specific standards, our engineers can work with additional standards to meet your needs. We are committed to ensuring that every analysis, simulation, and design meets or exceeds regulatory, safety, and performance requirements.

Explore Our Comprehensive Engineering Analysis Services

ASR offers a detailed list of Engineering Analysis Services tailored to your industry and application. Click a link below to learn more about our specialized analysis solutions, including:

CAE Services | Computer Aided Engineering

Computer Aided Engineering (CAE) services can take the guess work out of your design through the use of computer modeling. ASR’s Analysis Engineers are CAE experts using Finite Element Analysis (FEA) and Computation Fluid Dynamics (CFD) to analytically drive design decisions.

Finite Element Analysis (FEA)

ASR’s expert analysis engineers use Finite Element Analysis (FEA) as a tool to predict the structural and thermal performance of your product or solution. These predictions can be used for a wide range of applications.

Computational Fluid Dynamics (CFD)

With the use of computational fluid dynamics, we can analyze fluid behavior in aerodynamics, heat transfer, hydrodynamics, and more. Computational fluid dynamics provides a powerful mathematical model to generate computer simulations of fluid flow without the need for expensive physical testing.

Structural Analysis

Structural analysis encompasses all aspects of ensuring a component meets its mechanical durability requirements. The analysis types that may be required include:

Dynamic & Vibration Analysis

Products and structures including rockets, satellites, smartphones, high rise buildings, helicopters, turbines and more need to be designed and analyzed for dynamic and vibration loading. Our dynamic and vibration analysis capabilities include:

Fatigue & Fracture Toughness: Durability Analyses

In order to prevent customer disappointment from a lack of durability, it is critical to have an understanding of a products fatigue and fracture toughness life. Durability can be simplified to be the ability of a product to be used many times.

Thermal Analysis

Whether you’re looking to develop a combustion engine, heater, electric motor, steam turbine, spacecraft, rocket engine, electric system, or manufacturing equipment, thermal properties play a critical role in the success of your project. We apply Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) to analyze thermal properties for thermal management design validation and optimization.

Composite Analysis

Composite analysis can significantly improve the efficiency of your design by allowing for optimization and can find and fix failure points prior to investment in expensive prototypes.

Multiphysics Analysis

Many products and designs need the combination of Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) in order to provide accurate models. We use multiphysics analysis to simulate multiple physical phenomena to provide accurate models.

Engineering Standards & Codes

Whatever engineering standard your product has, we will ensure compliance using our design and analysis expertise.

Optomechanical

Opto mechanical systems are commonly used by many industries including space, defense, communications, and others. We have experience in the design and analysis of opto mechanical systems to ensure that they are robust enough to remain operational after deployment and through the lifespan of the instrument.

Drop Test Analysis

Drop Tests are an instrumental part in qualifying many of today’s products ranging from every-day consumer products to commercial and military-grade aerospace components.

Microfluidics

Microfluidics is a rapidly emerging industry with a strong potential to disrupt multiple industries. We use Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) to model microfluidic devices for a wide range of properties in order to discover and fix design issues and deliver design validation and optimization.

Qualification Testing Analysis

In aerospace and mechanical engineering, many products need to pass qualification testing prior to reaching the market. Many times products that go through testing don’t pass much to the surprise of the developers. We can analyze designs for certification requirements and implement design revisions to better ensure that your product will pass on its first attempt.

Icing Analysis

To get an aircraft to pass FAA approval for flying in icing conditions it requires rigorous analysis and testing. Defense and private aircraft which may also encounter icing conditions need to be designed and analyzed in order to keep passengers safe. We use icing analysis software to guide the design and implementation of ice protection equipment.